By Bob Karz K2OID Every Field Day is an adventure, but this year’s event was...
K2AS
This looks interesting. 2m, 220, and 440 capability. Arduino Based Transceiver
I went down/up to the repeater site today, and made the following changes: Added...
If you have an FTM-400, they have released new firmware. The only major change...
Thanks to Tom Maszerowski, KC2TCK, we have some Field Day Photos. Click on the...
A few years back I had kept seeing ads for Anderson Power Poles, and...
The Drumlins Fusion repeater is up and running on 444.750 +5 Mhz, 110.9 PL.
I’ve noticed some new ones in WNY: 147.2550 +0.6 MHz 107.2 Lancaster Erie W2SO...
On Saturday, I went down and adjusted the squelch on the repeater. Not a...
More info at: http://qrznow.com/new-yaesu-ftm-100dr-system-fusion-radio-coming-this-june/
Interesting article: UHF Connector Test Results
With cooperation from the weather man we were able to get the antenna up...
Here is a PDF of Fred’s slides from the April 9 XARC Meeting. XRX...
I found this online. Very informative. http://charlottedstar.org/Comparison%20of%20Amateur%20Radio%20DV.pdf
Not sure if anyone else has had a digital QSO yet on the repeater,...
4/4/2015 I went back down this afternoon and finished installing the System Fusion repeater....
Thanks to Mike W2HYP and Fred WO2P, the new repeater is close to being...
I’ve had a personal weather station running at my QTH for about 6 years....
RARA (Rochester Amateur Radio Association) will be holding amateur license classes this spring –...
I bought this Hammarlund HQ-145-X on eBay. I paid a little more than I...
My first professionally printed QSL card since 1973, 3 addresses ago, when I was...
Lying in bed last night, I thought it would be neat if there was...
Despite some rain and wind, Mike Rink W2HYP, Jim Stefano W2COP, and I managed...
As you might have heard, we have made a decision to buy as Yaesu...
We attempted a work party at the new repeater site, but the weather didn’t...
Over the years, the XARC has been known for several things: Foxhunts, Field Day,...
If anyone is good at graphic design, we could really use a club logo....
Thanks to everyone who attended last nights meeting. We had a good turnout, and...
[xarc] Rochester mini maker faire… is Saturday November 22nd at the riverside convention center....
If you didn’t see it, there is a short article about XARC in the...